ERP- A Brief Structure and Discussion of its Success and Failure Abstract Enterprise resource planning (ERP) systems are increasingly being adopted by organizations in developed countries, this adoption seems beset by significant rates of faliure, leading to a large waste of investment and other resources. This paper seeks to understand why ERP failure occurs. […]
Research and Development in Wire Electrical Discharge Machining(WEDM) :A State of An Review Abstract Wire electrical discharge machining (WEDM) is being widely used for a long time for machining conductive work materials which are difficult to be machined by the main stream machining processes. WEDM has evolved from a simple means of making tools […]
The Effect of Process Parameters on Mechanical Stir Casting Process Abstract In this study, composites-casting with an aluminium alloy C355 and 5(wt.%) of SiC reinforcement were made. Side by side investigations of tensile strength of the composite was done, 17 samples were fabricated for this study and these samples were machined as per dimension […]
Design Optimization of 3hp,4-Pole, 3-Phase, 50Hz Induction Motor Employing Improved Genetic Algorithm Abstract This paper deals with design optimization of asynchronous machine (3hp,4 -POLE, 3-PHASE, 50Hz) considering three objective functions torque(T), cost(C) and efficiency (η);using genetic algorithm (GA) /improved genetic algorithm(IGA) & non-linear programming. Authors Shivendra Prakash Verma View PDF
Nature Inspired Optimization Technique : Bacterial Foraging Algorithm Abstract In this era of modernization, deregulation and competition the scenario of the optimization techniques is being evolved dramatically towards the functional mimicry of nature. There are many nature-inspired optimization algorithms such as PSO, Ant Colony, Genetic Algorithm, Evolutionary Techniques etc. Recently Bacterial foraging Optimization Algorithm […]
Microcontroller Based PMDC Motor Control Using Image Processing Algorithm Of Matlab Abstract DC Motor control is very common in robotic application. The developments in this kind of project are widely used in most electronic devices nowadays. There are many application that have been developed based on motor control in electronic and electrical field such […]
Rotor Faults Diagnosis in Traction Drives Using Virtual Current Technique For Railway Application Abstract This paper presents the Virtual Current Technique as a new model-based diagnostic procedure for the diagnosis of rotor faults in traction drives for railway applications. A rotor fault in a traction drive based on induction motors produces due to some […]
Harmonics : Sources , Effects and Control Technique Abstract Power systems are designed to operate at frequencies of 50 or 60 hertz. However certain type of load produce voltage and currents having frequency that are an integer multiple of fundamental frequency. These are called harmonics. The pure sinusoidal wave shape generated by electrical utilities […]
Multi Sensor Data Fusion Based Expert System in Condition Monitoring and Fault Detection: An Induction Motor Case Study Abstract Condition monitoring is a predictive maintenance procedure, which is used to provide warning and predict faults of a system at an early stage, so catastrophic breakdown of the system can be avoided. An efficient condition […]
Chip Design Sign-Off For Shrinking Technology Abstract In today’s IC’s competitive market place, as technology is shrinking and we are stepping into 45nm and below, IC’s complexity is increasing, die areas are also getting larger in order to incorporate the increased functionality that comes with more advanced technology. Due to shrinking design, physical verification […]